Patchsee

PLUgCAP, the RJ45 condom

 Home > The PLUgCAP concept

PLUgCAP, the RJ45 condom


Why have we created the protective RJ45 PLUgCAP ?


  • Our extended field experience proves this:
    nine times out of ten network cable failures are caused by an RJ45 plug with damaged plastic strips. As a consequence:
    • The pins in the socket cannot fit between the matching slots any more…
    • Worse, as a result of the damage to the RJ45 plug,
      the network socket can be permanently damaged and in that case a new one has to be rewired !
cable ethernet Damaged RJ45 plug
protection cable ethernet
cordon ethernet
Network sockets damaged due to a faulty plug

  • This is even more true during network cabling operations: For instance whilst re-patching, because plugs are even more at risk when installing or moving cables, or when laying cables in false floors, in false ceilings, in cable routing trunking systems, or with long length cables applications...At the same time, RJ45 connectors are becoming more and more fragile over the 10 Gigabyte versions.

As a result: you can spend hours and hours testing and re-testing your network just to locate a faulty connection!


PLUgCAP, thebest damage prevention... which gives you the most efficient protection

  • A plastic body to cover the RJ45 cable plug fully, fitted with an eye to pull the network cable during installation...
  • PLUgCAP has been fully designed to completely protect the most sensitive part of the cable, during the most critical Ethernet cabling operations !
  • Plug in with total peace of mind: PLUgCAP offers you the most efficient solution to prevent network breakdowns...

With PLUgCAP, the plug is entirely protected, up to the final connection.

PLUgCAP, full safety all the way...

cables reconfiguration if the cables are re-used Whilst re-patching:
RJ 45 protection during cables removal / cables reconfiguration if the cables are re-used.
cablage ethernet protection cables ethernet
During patching, setting up new equipment, strand passage of 6 patch cords from the rear of the patch panel to the front.
through false floors, cable trunkings, false ceilings. Pulling long RJ45 cables from 5 to 30 metres, through false floors, cable trunkings, false ceilings
Protection for RJ 45 patch cords waiting to be connected. Protection for RJ 45 patch cords waiting to be connected.
Protection for RJ 45 patch cords waiting to be connected.
Patch cord on standby in the office. Patch cord on standby in the office.
Pulling out cables for passage in false ceiling or cable tray. Pulling out cables for passage in false ceiling or cable tray.
Pulling out cables for passage in false ceiling or cable tray.
Whilst pulling a patch cord by one end through a high density environment without risking damaging the other end. Whilst pulling a patch cord by one end through a high density environment without risking damaging the other end
It is possible to pull the cord through an electrical flexible conduit. It is possible to pull the cord through an electrical flexible conduit (PLUgCAP pulling eye) whilst pulling a network cable through false ceilings or wire trunkings.

PLUgCAP, a leading name in cale protection

packaging plugcap

All our Patchsee system DIRECTPATCH cables (long lengths) are delivered equipped as standard with PLUgCAP.

P/N DESIGNATION QUANTITY / BLISTER
PLUgCAP Protection for RJ45 connectors 3
Test PATCHSEE for free !
Free demonstration kit Ask for a demo kit

Availability: Online Stock


Équiopé en standard de 2 plugcap
They have tested it...

See all the testimonials
3PDesign

All products: ID-SCRATCH | PATCHCLIP | DESKPATCH | PLUGCAP | ID-FORM

 Follow us